How To Put A Bike Chain Back On Gears

How to put a Bike Chain Back On Gears

A passionate rider will ultimately see the chain on his bike become loose or even break completely. Fortunately, if you understand what you have to do, you won’t have to send your bicycle to a highly expensive service shop to fix this usual issue. Nearly everyone who owns a bike has experienced the chain coming off once or twice while riding. As a result, we went over how to put a bike chain back on gears, and your bike frame step by step to make your life a lot better. This guide will tell you how to put a bike chain back on gears. Without any ado, let’s get started!

Steps to Put a Bike Chain Back On Gears

The worst nightmare for a bike rider is having their chain fall off in the middle of a ride. Surprisingly, replacing a bike chain is easy than it appears. It takes only a few minutes and requires only a few easy steps.


The very first step you need to take is using the gear lever to shift the bike chain to the large ring position even while riding. It is frequently the sole remedy that is required. During riding, downshifting to the lowest gear places the bike chain on the biggest chain. Then, continue riding to observe whether the chain returns to its original position.

Raise The Back Wheel

If the first step fails, you’ll have to get off your bicycle and detach the bike chain before reinstalling it. You may achieve this by rotating the pedals using one hand while elevating the back wheel with the other. Check to see if it resolves the issue. If not, move on to step 3.

Release The Bike Chain Tension

In most cases, when the chain is not broken but simply slipped, you’ll have to loosen the strain on the bike chain to repair it. If your bicycle features a rear derailleur, release the bike chain. Loosen the chain and wrap it over the front chainring on bicycles having rear derailleurs. Many bicycles include a spring-loaded rear derailleur to hold the chain tightly when pedaling. Use this information for your benefit by pulling the rear derailleur forward, allowing slack in the bike chain.

Release The Rear Derailleur

Let go of the rear derailleur when you’ve properly reinstalled the chain in the chainring. If you’d done everything right up to this point, you would be ready to ride the bicycle comfortably without any further problems. Raise the bicycle and turn its pedals if you’re not sure that you’ve correctly reattached the chain.

Putting The Chain Back On

It may require more than a few basic steps to repair the bike chain, particularly if it has become caught or damaged rather than slipping. If the chain is damaged or de-linked, just pass it through the lower and upper jockey wheel ends of the rear derailleur towards the small gear.

Run the chain through the little cog in front of the pedals. Thread the chain all across pedals and attach the ends with a master link. To join the link, you will have to utilize your left thumb to press the rear derailleur gently.

Final Check

After you’ve put the bike chain back on gears, you’ll have to double-check everything. Make sure you’re wearing comfy clothing this time. You can switch the gears on your bicycle’s rear and front derailleurs to see if they make any noise. If you didn’t hear any strange sounds and the chain didn’t make any noise, the bike chain has returned to its original place correctly. You’ve already put the bike chain in its proper place.

Things To Keep In Mind

There are some things to keep in mind when it comes to putting a bike chain back on gears. They are as follows:

  • Never try to put your fingers in the bike chain; otherwise, you can injure them or have them chipped off. Put the bike chain back on gears with caution.
  • Before repairing the bike chain, tie up the loose clothes, long hair, or anything like that. It can be harmful if it becomes tangled.
  • If possible, use rubber gloves because your hands can become greasy when repairing the chains.

Reasons Why Chain Slips

A bike chain will always come off for one of a few reasons. It might be a damaged gear system, a jammed or filthy chain, a misplaced derailleur, or even a chain that is too long. It results in a slack chain due to a lack of sufficient chain tension, leading to chain slipping.

How to Prevent Chain Slippage In Future

  • For a single-gear bicycle, the solution is straightforward: remove the rear axle, draw back the wheel, and re-tighten the rear axle. It will aid in tightening the chain and, as a result, resolving the problem.
  • However, we must inspect both the bike chain and rear and front derailleurs for faults with multi-gear bicycles.
  • If the bike chain has been elongated by more than 0.5 percent, it must be replaced. However, in most situations, the derailleurs’ dislocation can be re-tightened with a wrench.

Maintain your bike chain

If you really want your bike chain to last as long as possible, you must properly maintain it. For starters, make sure the chain is clean and lubricated so that it connects and rotates smoothly without so much stress or dust that might lead to slippage and damage. Furthermore, avoid putting too much strain on your bicycle. Divide loads equally, and think about investing in a sturdy bike luggage trailer.

People Also Ask!

What to do if the chain falls off continuously?

If the bike chain continues falling off of position, it’s likely that the chain or gears are severely damaged. Inspect your bicycle by a technician to see what has to be changed. Some bicycles, such as fixed-gear bicycles with a shifter system in the hub, lack a derailleur. In such cases, put the bike chain onto the back derailleur while spinning the wheel as required. Perhaps you will have to buy all of the necessary equipment.

Why Did my bike chain come off and how to set it?

If your bike chain comes off from the chain set then you need to adjust L Screw.

How much does it cost to fix a bike chain?

Normally shops charge $15 to $20 to fix a bike chain but you can purchase a bike chain tool for $10 to $50 and learn it free to fix.


All bike rider has faced chain slippage at some point, and it may occur to you as well, although if you have a new bicycle with a clean and shining chain. However, as you can see from this post, the solution is quick and simple!

It is vital to understand the basics of bike chain maintenance. Because it’ll save you from visiting the technician and wasting time and cash on minor fixes and problems. Moreover, you’ll also avoid being stuck on the roads if your bike chain becomes loose. We hope this article will assist you in doing your duties effectively!

Jeffrey Kuck

Meet Jeffrey Kuch, a passionate cyclist who has been cycling for more than a decade. With his love for the sport and his unwavering dedication, Jeffrey has not only honed his skills but has also inspired many to take up cycling. As an avid blogger, he shares his insights, experiences, and knowledge about the world of cycling, helping fellow cyclists to improve their techniques and learn more about the sport they love. Whether he is exploring new terrains or competing in races, Jeffrey's enthusiasm for cycling is contagious. Through his writing, he hopes to inspire others to embark on their own cycling journey and discover the joy of the sport.

Recent Posts